Skip to product information
1 of 2

AusPro Automotive Detailing & Car Care Products

Gtechniq Smart Fabric

Gtechniq Smart Fabric

Regular price $47.85 AUD
Regular price Sale price $47.85 AUD
Sale Sold out
Shipping calculated at checkout.

Why use Gtechniq Smart Fabric?

I1 Smart Fabric protects all kinds of fabrics from water-based stains. It is breathable and extremely durable, giving long-lasting results.

I1 makes ordinary fabrics waterproof and easy to clean. Use it to prevent soaking, swelling or rotting on any fabric. Ideal for use on your car, convertible roof or interior carpets or fabrics.

Smart Fabric is colour safe. Nanoparticles that make up I1 Smart Fabric coat each fabric fibre individually, leaving the texture unaffected, allowing the material to breathe. This means stale air will still be able to escape while repelling water and oil-based liquids.

Even more hydrophobic than its predecessor, I1 Smart Fabric V2 leaves no remnants of spillage and moisture simply falls off a coated surface. Laboratory testing reveals that I1 V2 repels water to the highest standard set by the American Association of Textile Chemists and Colorists (AATCC) – ISO 5. Wash tests reveal the product remains at its full performance level after being washed on a 40-degree cycle, and even after five washes still performs better than its predecessor.

Gtechniq Smart Fabric is our preferred fabric protection product at AusPro Automotive Detailing & Car Care Products.

Application on a car’s interior will give you between 6 and 12 months durability - depending on how ‘used’ the surface is. On convertible roofs, the product will last for up to 2 years.

Application Instructions

If using on an interior surface,  prepare the surface you are going to treat by thoroughly cleaning and drying the fabric.

For exterior use, a All Purpose Cleaner for dirty surfaces, or dilute at a ratio of 5:1 with water for less soiled areas

Make sure the surface you have cleaned is thoroughly dry (for best results 48 hours in good drying conditions) before applying I1 Smart Fabric. For the optimal impregnation of I1 into your fabric, its moisture content must be below 15% which is significantly dryer than touch dry

Shake bottle well before use and wear gloves

Apply at a temperature of 5°c or above, in a well ventilated area

Use out of direct sunlight

Apply by spraying evenly from a distance of about 15cm ensuring thorough saturation of the surface you are covering.

Make sure your application is thorough as once Smart Fabric has dried, you cannot apply a second coat, as the first coat will repel any additional product

Avoid over spraying on surrounding substrates, if this happens, wipe immediately with a microfiber cloth. Also wipe any excess from the fabric with an MF1

Leave to dry for 24 hours, after this time the full effectiveness of the product will be achieved

Store in a cool, dry place

Use product within 12 months of opening


View full details